The power-steering unit on the Vehicles is a hydraulic unit that assists turning the front tires while driving. Power-steering fluid is necessary to aid run the unit. Though power-steering fluid is not consumed choose gasoline, a leak may reduce the amount of fluid in your automobile. If you hear a loud squeak when turning the wheel, inspect the power-steering liquid level and also include extra fluid if required.


Under The Hood:

How to Add Power Steering Fluid to Pontiac G6 2006 Car

Make certain the engine is cool. Locate the power steering reservoir. On the 2006 G6, it is placed to the power steering pump near the alternator.

You are watching: 2008 pontiac g6 2.4 power steering fluid location


Rerelocate the dipstick from the reservoir. The liquid level have to be in the cross-hatched location of the dipstick.

Add small amount of power steering fluid until the level is correct. Do not overfill the reservoir. If also much liquid is included, rerelocate the excess.


How to Add Power Steering Fluid to a 1998 Pontiac Bonneville

Park the 1998 Pontiac Bonneville on a level surchallenge, connect the parking brake and also open up the hood to enable the engine to cool. You need to include power-steering liquid as soon as the engine is cool.

Locate the fluid reservoir in the engine compartment. The reservoir is located near the ago of the passenger side of the engine compartment, to the best of the radiator coolant reservoir.

Open the cap of the power-steering reservoir and also wipe off the dipstick via a rag.

Reattach the cap, rerelocate it from the reservoir and also inspect the fluid level on the dipstick. You should add liquid if the liquid level is below the “Full Cold” note on the dipstick.

Pour power-steering fluid into the reservoir in little amounts and also continually examine the fluid level on the dipstick making use of the approach explained in Tip 4.

Secure the liquid reservoir cap to the reservoir when the liquid level reaches the “Full Cold” mark.


Items you will certainly need

Rag

Power-steering fluid


How to Add Power Steering Fluid to a 2002 Park Avenue

Allow the engine to cool thoroughly before attempting to inspect your power steering liquid. Rerelocate the power steering reservoir cap and wipe off the dipstick attached.

Screw the reservoir cap back into the power steering unit and take it ago off aget to check out the dipstick. Much favor checking your oil dipstick, you should wipe off the power steering liquid from the dipstick initially to rerelocate the excess fluid that has sloburned roughly it because of normal driving.

Add power steering liquid to the reservoir if the dipstick reads at the "FILL" note or much less than half way in between the "FILL" and "HOT" marks. Feed the funnel tub right into the power steering reservoir and include a small little bit of liquid in the funnel at a time.

See more: Is There A Way To Estimate A 60 Yard Dash To 40 Yard Dash Calculator

Check the power steering fluid levels aobtain by replacing the cap earlier on to the reservoir and also then removing it. Add even more liquid to the reservoir until the dipstick reads the liquid level halfway between the "FILL" and also "HOT" marks. Do not overfill the reservoir, as damages will occur to the power steering pump.