Perma-Banned! JK LOL
*
*
Join Date Dec 2007 Location Omaha, NE Posts 7,921 Thanks (Received) 0 Likes (Received) 0 Dislikes (Received) 0Chats28500


You are watching: 2006 pontiac grand prix heater core replacement

*

*
*
*
*
Parts InformationHeater CorePart# 89018289Price $203.40Contact dealer for the majority of existing part and also price information. Labor InformationHeater Core Replace Skill: BWarranty: 2.0Normal: 2.7With Center Console, AddSkill: BWarranty: 0.6Normal: 0.8Heater Case/Cover ReplacementRemoval Procedure1.Remove the RH Instrument Panel Closeout/Insulator panel. 2.Remove the LH Instrument Panel Closeout/Insulator panel. 3.Remove the floor carpet. 4.Remove the rear floor air outlet duct from the holes in the floor reinforcement. 5.Disattach the rear floor air outlet duct from the heater air outlet cover. 6.Remove the rear floor air outlet duct. 7.Rerelocate the heater air outlet cover screws (2). 8.Rerelocate the heater air outlet cover warmth stakes (1) via a little chisel. 9.Remove the heater air outlet cover from the HVAC module assembly.10.Rerelocate the heater core cover screws (2). 11.Rerelocate the heater core cover warmth stakes (1) with a small chisel. 12.Remove the heater core cover from the HVAC module assembly.INSTALLATION PROCEDURE 1.From the inside of the heater core cover, drill the dimples surrounding to the heat stakes making use of a 5.5 mm (7/32 in) drill little. 2.Install the heater core cover to the HVAC module assembly. NOTE: Refer to Fastener Notice in Service Prewarns. 3.Install the heater core cover screws (2). Tighten Tighten all screws to 1.5 N.m (13 lb in) . 4.From the inside of the heater air outlet cover, drill the dimples adjacent to the warm stakes utilizing a 5.5 N.m (7/32 in) drill little bit.5.Install the heater air outlet cover. 6.Install the heater air outlet cover screws (2) Tighten Tighten the screws to 1.5 N.m (13 lb in) . 7.Connect the rear floor air outlet duct to the heater air outlet cover. 8.Install the rear floor air outlet duct to the holes in the floor reinforcement. 9.Install the floor carpet. 10.Install the RH Instrument Panel Closeout/Insulator panel. 11.Install the LH Instrument Panel Closeout/Insulator panel. Heater Core ReplacementTOOLS REQUIRED J 38185 Hose Clamp PliersREMOVAL PROCEDURE 1.Drain the coolant. Refer to Draining and Filling Cooling System in Cooling System. 2.Use J 38185 in order to place aside the heater hose inlet and also outlet clamps at the heater core. 3.Disattach the inlet and also outlet heater hose from the heater core. 4.Remove the RH Instrument Panel Closeout/Insulator panel. 5.Remove the LH Instrument Panel Closeout/insulator panel. 6.Rerelocate the floor carpet. 7.Rerelocate the rear floor air outlet duct from the holes in the floor reinforcement. 8.Disconnect the rear floor air outlet duct from the heater core outlet cover. 9.Remove the rear floor air outlet duct.10.Rerelocate the heater core outlet cover screws (2). 11.Remove the heater core outlet cover warm stakes (1) via a small chisel. 12.Remove the heater core outlet cover from the HVAC module assembly.13.Remove the heater core cover screws (2). 14.Remove the heater core cover warm stakes (1) through a tiny chisel. 15.Remove the heater core cover from the HVAC module assembly.
*
16.Remove the heater core from the HVAC module assembly.17.Remove the heater core foam seal (1) from the HVAC module assembly.Installation Procedure1.Install a new heater core foam seal (1) to the HVAC module assembly. 2.Install the heater core to the HVAC module assembly. 3.From the inside of the heater core cover, drill the dimples surrounding to the heat stakes using a 5.5 mm (7/32 in) drill bit.4.Install the heater core cover. NOTE: Refer to Fastener Notice in Service Precautions. 5.Install the heater core cover screws to the heater core cover. Tighten Tighten all the screws to 1.5 N.m (13 lb in) . 6.From the inside of the heater core outlet cover, drill the dimples nearby to the warmth stakes using a 5.5 mm (7/32 in) drill bit.7.Install the heater core outlet cover. 8.Install the heater core outlet cover screws (2). Tighten Tighten the screws to 1.5 N.m (13 lb in) . 9.Connect the rear floor air outlet duct to the heater core outlet cover. 10.Install the rear floor air outlet duct to the holes in the floor reinforcement. 11.Install the floor carpet.12.Install the RH Instrument Panel Closeout/Insulator panel. 13.Install the RH Instrument Panel Closeout/Insulator panel. 14.Connect the inlet and also outlet heater hose to the heater core. 15.Use J38185 in order to replace the heater hose inlet and outlet clamps to the heater core. 16.Refill the coolant.

See more: 2000 Dodge Neon Tire Size For 2000 Dodge Neon 2000, 2000 Dodge Neon Tire Size

Refer to Draining and Filling Cooling System in Cooling System.